Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire

Press Release | February 4, 2020

Dominate the Toughest Terrain with the Sedona MX-208SR

Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire is a brand-new steel-belted radial tire from Sedona Tire & Wheel.

The following contains excerpts from a press release from Sedona Tire & Wheel…

Photos and video courtesy of Sedona Tire & Wheel

Boise, ID – After extensive research and development while gathering input from moto riders from across the country, Sedona Tire & Wheel is proud to announce their newest steel-belted radial-carcass motorcycle tire, the MX-208SR.

VIDEO | Sedona Tire & Wheel MX-208SR Tire

 

The steel-belted radial tire construction means you can run lower air pressure that gives you more traction. Additionally, the anti-rebound energy-dispersing properties of the steel-belted carcass of the MX-208SR creates a “dead-blow hammer” effect on sharp or square edged impacts providing for a more controlled footprint and predictable performance.

Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire is a brand-new steel-belted radial tire from Sedona Tire & Wheel.

“The Sedona MX-208SR tire follows the ground better under acceleration chop/square edge, which gives me a more connected feel to the motorcycle,” industry product tester Kris Keefer explained. “The comfort that I get with the Sedona MX-208SR steel-belted radial carcass was unmatched out on the trail. On longer days in the saddle, the MX-208SRs almost acted like a second set of suspension, which, at my age, was a welcomed feeling.”

This all-new tire not only features a steel-belted radial carcass, but also has a dual rubber compound with a front-tire elliptical and rear-tire drive-link tread pattern. The tall center lugs are “pocket” siped on the rear tire to provide flex and a sturdy drive bite. The aggressively staggered side lugs are linked at the tread base, providing consistent and superior cornering.

Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire
The front-tire lugs are in an elliptical pattern that gives them an overall larger contact patch, while the rear has tread positioned for more bite in acceleration and braking.
Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire is a brand-new steel-belted radial tire from Sedona Tire & Wheel.
Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire is a brand-new steel-belted radial tire from Sedona Tire & Wheel.
Sedona Tire & Wheel Steel-Belted Radial MX-208SR Tire

“I had the opportunity to test these tires at the Crow Canyons annual Turkey Run,” former professional motorcycle racer and current OMA Race Promoter Brock Sellards said. “[On] three-hundred acres of hilly, slippery, rocky, muddy conditions that will challenge any caliber rider. These new Sedona steel-belted radial tires are the answer! The knobbies are the deepest I’ve seen, yet to my surprise I did not experience tire roll. It also hooked up well on the motocross track that was on the dry side. Sedona hit it out of the park on this one.”

Reclaim the trail with Sedona’s MX-208SR tire.

For information, visit www.sedonatires.com or contact your local Western Power Sports (WPS) dealer

 

Click here for more New Products on Cycle News.

 

Comments