Cycle News Staff | March 26, 2023
Enduro Engineering (EE) has a new line of protection parts for the 2023 Beta XTrainer. Here’s a look at 12 of the new offerings, starting with a video overview from EE:
VIDEO | Enduro Engineering has the Beta XTrainers covered
Enduro Engineering Beta Xtrainer
Brake Pedal Tips
P/N 17-4018
Price: $29.95
The 35mm-wide Brake Pedal tips are made in the USA out of high-grade stainless steel. Designed to be stronger than stock, they offer maximum grip with an aggressive tread. Mounting hardware is included.
Spark Arrestor End Cap
P/N 40-4115
Price: $119.95
The USFS-approved Spark Arrestor End Cap is a cost-effective option vs. replacing the whole silencer. Enduro Engineering found no power loss in comparison to the stock end cap in testing. The screen can be removed for riding in a closed course (or for replacement or servicing) by simply removing two bolts.
Skid Plate
P/N 24-402
Price: $129.95
The full-aluminum skid plate protects the engine, water pump and oil filter, and it includes side tabs for coverage of frame rails and footpeg mounts. Vent holes in the side tabs let air flow through and mud fall out. Additional holes on its base let oil drain out while the skid plate remains on the bike. All the needed installation hardware is included.
Linkage Guard
P/N 31-4117
Price: $44.95
The skid-plate-mounted linkage guard protects the shock linkage from rocks, logs and other debris in addition to preventing dirt or mud from packing into the shock linkage, which can extend the life of the bearings. It is strong yet flexible and is made from an ultra-slick plastic designed to ‘glide’ over debris. Installation hardware is included.
Rear Brake Disc Guard
P/N 33-048
Price: $109.95
This disc guard protects the expensive rear-brake rotor. The guard replaces the entire brake carrier for extra strength and features a replaceable fin.
Carbon-Fiber Pipe Guard
P/N 40-741
Price: $159.95
The exhaust-pipe guard is made from tough carbon fiber and protects the exhaust pipe from damage. All the hardware needed for installation is included.
Clutch Slave Cylinder Guard
P/N 13-400
Price: $42.95
In case the chain comes off or the bike falls on rocks, this guard can help prevent damage to the engine case and the clutch-slave-cylinder guard. (It will not work with 15-tooth sprocket).
Radiator Braces
P/N 11-402
Price: $109.95
These radiator braces work with the OEM fan and protect the radiators from getting twisted or bent, without sacrificing airflow.
Radiator Guards
P/N 12-4123
Price: $179.95
The billet radiator guards provide side and front impact protection for the radiators. They can be used with either the OEM fan or an aftermarket one and are engineered for maximum air flow. (Not compatible with radiator braces mentioned above.)
Aluminum Moto Roost Deflector Arms
P/N 53-4020
Price: $59.95
The Moto Roost Deflector Arms can be mounted directly to the brake and clutch lever perches. Sold in pairs, they are designed to flex on impact or crash. (A Plastic Roost Deflector is required for some).
Full Wrap Aluminum Debris Deflectors
P/N 50-5214B (Black); 50-5214S (Silver)
Price: $67.95 (Black); $59.95 (Silver)
The full-wrap aluminum debris deflectors attach to the ends of the handlebar and are designed to not take up valuable space on the bars. Sold in pairs, units are available to fit the popular handlebars, including Renthal FatBar, Neken 1-1/8-inch, and Pro Taper 1-1/8-inch.
Comfort Seats
P/N 75-4320 (Standard),P/N 75-4620 (Low) P/N 75-4220 (Tall)
Price: $199.95
Comfort Seats are available in Standard height, which retains the OEM seat height, Low (1/2-inch lower) and (Tall). The complete seats are made in the USA and are ready for installation, with the base, foam and cover all included.
For more information, visit enduroeng.com
