Works Connection has new 7075-T6 aluminum footpeg mounts (P/N 20-513) for Yamaha YZ two-strokes that relocate the pegs down by 10mm and back by 10mm to open up the rider triangle, making it easier to go from sitting to standing, while still allowing a good feel for the brake pedal and shift lever.
Material was added to beef up the mounts, and they work with stock or aftermarket footpegs. MSRP is listed at $199.95, and the mounts come with titanium pins, stainless washers and cotter pins.
Here’s the complete press release from Works Connection…
ALUMINUM OFFSET FOOT PEG MOUNTS YZ 125/250 2-Strokes
Fits:
2006-2026 YZ 125
2006-2026 YZ 250
Retail $199.95 pair
Part # 20-513
Our all-new 7075-T6 Aluminum Foot Peg Mounts are designed specifically for the YZ 2-Strokes.
They move the pegs DOWN (-10mm), and BACK (-10mm). These aluminum mounts were designed and engineered to utilize stock pegs or any aftermarket pegs. These very calculated measurements open up the cockpit, while still allowing a good feel for the rear brake pedal and shift lever. Our goal was to offer a better, less cramped feel while adding more comfort.
We also added material in areas of the mounts to ensure strength and longevity while also keeping ground clearance in mind.
The Yamaha YZ 125/250’s cockpit (rider triangle) is a little cramped since the chassis dimensions have not changed in years. The distance from seat to pegs is shorter than other bikes, which requires more effort to transition from sitting to standing.
You can use ANY foot peg you prefer with our Foot Peg Mounts. Stock (OEM) or Aftermarket.
The kit consists of (2) Aluminum Foot Peg Mounts (Left and Right), (2) Titanium Pins, (2) Stainless Washers and (2) Cotter Pins.
- Affordable at $ 199.95 pr.
- Made from Aircraft Grade 7075-T6 Aluminum
- Lowers pegs by (-10mm), and moves pegs back or rearward (-10mm)
- Manufactured with tighter tolerances than O.E.M. parts
- Opens up rider triangle, and makes it easier going from sitting to standing
- You can use ANY pegs you like with our mounts
- Laser-engraved ‘WC’ logos
Learn more at www.worksconnection.com
